If a group of pneumatic equipment is not properly maintained or used, it can be damaged prematurely or frequently, resulting in early "decommissioning" of the equipment. Therefore, if a problem is found, regular maintenance and repair must be carried out in time to extend the service life of the device. All pneumatic components shall be kept within the specified working pressure and voltage range. When used in environments with large amounts of water, oil droplets and dust, the protective cover must be covered to avoid damaging the product. Do not use fluid or air containing corrosive substances to avoid damaging the product. During the operation of the product, do not touch the terminal part or switch to avoid short circuit or circuit error, which may cause driving and electric shock. Do not place other objects on the product to avoid injury to human body and machine. Damage to products and equipment caused by product drops, in addition to the risk of improper operation and loss of control due to product damage.
Proper use and maintenance of pneumatic components
A set of pneumatic devices, if do not pay attention to maintenance work, will be premature damage or frequent failure, so that the service life of the device is greatly reduced, in the maintenance of pneumatic devices, should be found in view of the accident signs, timely measures, so as to reduce and prevent the occurrence of failures, prolong the service life of components and systems. Therefore, enterprises should formulate maintenance management standards for pneumatic devices, strengthen management education and strict management. The central task of maintenance work is to ensure the supply of clean and dry compressed air to the pneumatic system, to ensure the air tightness of the pneumatic system, to ensure that the oil mist lubrication components get necessary lubrication, to ensure that the pneumatic components and systems get the specified working conditions (such as the use of pressure, voltage, etc.), to ensure that the pneumatic actuator works according to the predetermined requirements.
